Muzata5Pack 3.3FT/1M Silver LED Channel System with Anti-UV Protection Crystal Clear Cover Lens, Aluminum Extrusion Profile Housing Track for Strip Light U Shape U1SW WT 1M,LU1 UV1

Excelente

I have a stairwell that that needed light. There was no easy way to install lights in the ceiling so I opted for installing a strip of leds in the handrail. This turned out to be a very impressive way to light the stairs. The handrail was your typical stained round wood rail with a flat bottom edge. To install the LEDs I had to use a router to make a slot in the bottom flat surface of the handrail which is the challenge of the project. With the high speed grabbing nature of the router it’s not possible to do this free hand. I had to clamp the railing down and temporarily fix a guide surface along side the surface I wanted to router. The router base would then ride on the railing and the guide surface. A vertical rail on the guide surface kept the cut positioned where I wanted it in the handrail. I used multiple small cut passes to eventually end up with the slot I needed.As it turned out, installing the entire aluminum channel and plastic cover would take a lot out of the hand rail so I just made the slot big enough to just use the plastic cover. I then attached the led strip with its adhesive backing and used 2 small beads of clear silicone caulk to glue in the cover. The silicone is easily removed with a knife if needed. The end result is great and I get lots of compliments on it. My led strip has a multiple brightness controller. I set it to a level below full bright to reduce stress on the leds and hopefully prolong their life. Get one that remembers brightness level setting when it loses power.

I order these to help light up my streaming studio and when they arrived they were damaged by the shipper, I put in a ticket with photos and without an issue I had a new set delivered. No time wasted and made me feel valued.The product as well when up very easy and looks great, if you need to cut them pick up a small hobby style saw and some cutters for the plastic cover which snaps right in.I did not use the clips that came with them because I have cats that walk around the desk area that I was mounting them too so I just drilled some small holes into them using the screws that came with them and it worked like a charm.

Excellent for the LED’s that I installed under my camper. Wanted something to protect the LED’s while also having something better to stick to than the trailer frame. If the glue gave way, lights would remain functional and trapped in the channel. I have the clear covers installed to allow the most light viewable. Super easy to cut both pieces…. Had a bit of a issue with the price as time will tell if the material will last season after camping season

I used these to mount strip lights along the sides of a pontoon boat. I chose a multipack because it exactly met the length requirement. If I had it to do again, I would have chosen longer pieces, even if it meant more money or leftover parts. The pieces are precisely made. The clear lenses were a good choice and snap in well. The provided mounting clips are better suited to indoor applications, so I elected to secure the strips with clear silicone sealant and I wrapped aircraft safety wire at each clip to ensure security. I also used silicone at each joint to prevent water from entering the channel. Overall, a good value, but I went into this project knowing that I would have to use some additional materials and handyman skills to make it work for my intended purpose.

Easy to cut, I’d suggest snips. I used a saw n tried grinding off burs n got hurt, snips will work , plastic pieces you can cut with scissors

Quality is good and fulfills purpose as described (used with Govee LED strip). I would describe this only as a partial diffuser given the channel depth, but this is mostly stated in the description. Would consider this again for similar installation.

Fit perfectly at the wall right under RV awning. Well made product. Highly reccommend